Security functions
Trusted Platform Module - TPM
TPMTrustedPla tformModule
To use the TPM, you must activate the TPM in the BIOS Setup before the software
is installed. The condition for this is that you have assigned at least the supervisor
password (see "
Secur ity functions", Pa ge 62).
Enabling TPM
• Requirement: You h ave set a supervisor password, see "Secu rity functi ons", Page 62.
► Call up the BIOS Setup an
d select the Security menu.
► Mark the TPM Security Chip Setting field and press the Enter key.
► Select Enabled to acti
vate the TPM.
Once you have activated the TPM the Clear Security Chip option appears.
Select Clear Securit
yChipto delete the h older in the T PM. By clicking o n Enabled,
all secret keys (e.g
. SRK - Storage Root Keys, AIK - Attestation Identity Keys
etc.) generated by
applications are deleted.
Please note that y o
u will then no longer be able to access the data you have
encrypted with th
e keys based on that holder.
► Fr om the Exit menu
, choose the option Exit Saving Changes.
► Press the enter key and select Yes.
The notebook wil
l restart, and TPM will be enabled after the reboot.
Disabling TPM
• Requirement: You h ave set a supervisor password, see "Secu rity functi ons", Page 62.
► Call up the BIOS Setup and select the Security menu.
► Mark the TPM Security Chip Setting field and press the Enter key.
► Select Disabled to deactivate the TPM.
► In the Exit menu, choose the option Exit Saving Changes.
► Press the enter key and select Yes.
Your notebook will now restart and TPM will be disabled.
Fujitsu 69
To Next Page
Loading...
Need help?
General