Working with the noteb ook
Access via LTE (configuration dependent)
If you ordered an integrated LTE m odule with your system, you can enjoy optimum
reception and maximum energy efficiency without awkward cables or antennas. An
installed LT E module is ready for immediate use.
If you did not order an LTE module, you can purchase the accessories for LTE reception
from your retailer or your Fujitsu Technology Solutions dealer.
For information about connecting with the LTE network, please see the d ocumentation
for the hardware that you will be using.
You can connect your device to the internet via LTE. To do this, use one
of the following connection types:
• Integrated LTE module (the type depends on your model variant)
• a USB dongle (a USB stick with your mobile phone provider ’s SIM card)
• a mobile end-device (e.g. mobile phone w ith Bluetooth or cable connection)
Ethernet and LAN
EthernetLAN
The internal network module of your notebook supports Ethernet LAN. You can use it to
establish a connection to a local network (LAN = Local Area Network).
► Pull the LAN a dapter out of the LAN port on
the notebook in the direction of the arrow.
► Push the LAN adapter upwards in the
direction of the arrow (1).
► Connect the network cable to the
LAN adapter (2).
► Connect the network cable to your
network port.
Your ne
twork administrator can help yo u to con figure and use the LAN connections.
The ne
twork cable is not included in the delivery scope . This type of
cable
can be obtained from a specialist dealer.
Use a
shielded network cable (CAT 5e).
56 Fujitsu
To Next Page
Loading...
