Removing and installing components
during servicing
Attaching the cover
2
1
► Put the cover
back in place (1).
► Fasten the screw (2).
► Complete th
e installation, see "
Finishin g c omponent removal", Page 85.
Finishing component removal
After you have removed or changed the system components as you required, please
prepare y our device for operation again as follows:
► Install the battery again (see "
Inserting battery", Page 49).
► Turn th
e notebook the right way up again and place it on a flat surface .
► Reconnect the cables that you disco nnected before.
Fujitsu 85
To Next Page
Loading...
