Working with the notebook
Charging the pen battery
The pen contains an integrated battery, which is automa tically charged w hen the
pen is fully inserted into its slot. The pen is also charged when the notebook is in
power saving mode or is switched off. A charging time of approximately 15 seconds
is sufficient to enable to pen to be used for 90 minutes again.
► Insert the pen f u lly in the slot.
After a charging period of approximately 5
minutes, the pen battery is fully charged.
Setting the pen
Operating system Menu
Windows 10
You can make various settings for the pen under System Control -
Hardware and Sound - Pen and Touch.
Calibrating the pen
Via the operating system, you must calibrate your tablet PC before first use with the
pen, so that it recognises the pen as accurately as possible.
You sho uld also always repeat the calibration if the co-ordination between the
pen and cursor movement deteriorates.
Operating system Menu
Windows 10
To calibrate, call up the Hardware and Sound / Tablet PC Settings function
in the Control Panel. You ne ed to calibrate both portrait and landscape
formats.
Fujitsu 37
To Next Page
Loading...
