Appendix
Appendix
Before Us ing the Optional Wireless LAN
This manual describes the procedures required to properly set up and configure the optional
integrated Wireless LAN Mini-PCI device (referred to as "WLAN device" in the r est of the
manual). Before using the WLAN d evice, read this manual carefully to ensure its correct
operation. Ke ep this manual in a safe place for future reference.
Wireless LAN Devices Covered by this Document
This document is applicable to systems containing the following device:
• Intel® Dual Band Wireless AC 9560 – 11a/b/g/n/11ac
Characteristics of the WLAN Device
• The W LAN devices are PCI Express Mini cards attached to the main board of the mobile computer.
• The WLAN devices operate in license-free RF band s, eliminating the need to procure
an FCC operating license. The WLAN operates in the 2.4GHz Industrial, Scientific,
and Medical (ISM) RF band and the lower, middle, and upper bands of the 5GHz
Unlicensed National Information Infrastructure (U NII) bands.
• The WLAN device is Wi-Fi certified and o perates (as applicable) a t the maximum data rate
of 867 Mbps in IEEE802.11ac mode, 450 Mbps in IEEE802.11n mode (300 Mbps in this
configuration); 54 M bp s in IEEE802.11g mode; and 11 Mbps in IEEE802.11b mode.
• The WLAN devices support the following encryption methods - WEP,
TKIP, CKIP, and AES encryption.
• The Wireless LAN d evices are compliant with the following standards: WPA,
WPA2, CCX1.0, CCX2.0, CCX3.0, and CC X 4.0.
100 Fujitsu
To Next Page
Loading...
