Settings in BIOS Setu p Utility
Exiting BIOS Setup Utility
BIOSSetupUtility
You need to select the desired option in the Exit menu and activate it by pressing the Enter key:
Exit Saving Changes - save ch
anges and exit BIOS Setup Utility
► To save the current menu settings and exit the BIOS Setu p Utility , select Exit Saving Changes and Yes.
The notebook is rebooted
and the new settings come into effect.
Exit Discarding Changes - Reject changes and
exit BIOS Setup Utility
► To discard the changes, select Exit Discarding Changes and Yes.
The settings in place when BIOS Setup Utility was called remain effective. BIOS
Setup Utility is terminated and the notebook is rebooted.
Load Setup Defaul
ts – load default values
► To copy the standard ent ries for all menus of the BIOS Setup Utility,
choose Load Setup Defaults and Yes.
Discard Ch anges - Discard Changes with out
exiting BIOS Setup Utility
► To discard the changes you have m ad e, select Discard Changes and Yes.
The settings in place when BIOS Setup Utility was called remain effective.
You can now make additional settings in the BIOS Setup Utility.
► IfyouwanttoexittheBIOS Setup Utility with these settings, select Exit Saving Changes and Yes.
Save Cha n
ges - save changes without exiting
the BIOS Setup Utility
► To save the changes, select Save Changes an d Yes.
The changes are saved. You can now make additional se ttings in the BIOS Setup Utility.
► If you want to exit B IOS Setup Utility with these settings, choose Exit Saving Changes and Yes.
Save changes and power off
► To save the changes and sw itch off your device, select Save Changes and Power Off and Yes.
The changes are saved. Your device is shut down.
78 Fujitsu
To Next Page
Loading...
