Fujitsu Lifebook U939X - Input and Display Issues

Tro ubl eshooting and ti ps
The cursor does not correctly follow the
stylus movements
Cause
Troubleshooting
Stylus incorrectly calibrated. ► Calibrate the stylus as show n under
Hardware and Sound / Tablet PC Settings
in the C ontrol Panel, see "
Adjusting the
stylus", Page 37 and "Calibrating the stylus",
Page 37.
Stylus input not working
Cause
Troubleshooting
The stylus is in power saving mode.
► Press gen tly on the tip of the stylus to
reactivate the stylus.
The stylus batt ery is completely discharged.
► Carefully insert the stylus in its slot on the
notebook to charge the stylus battery.
The notebook d oes not start after switching it on
Notebook
Cause Troubleshooting
The battery is dead.
► Connect the not
ebook to the power supply
via the AC adapt
er an d charge the battery.
The AC adapter is not connected properly. ► Check whether the AC adapter is properly
connected to the notebook.
► Switch the notebook on.
The notebook stops working
NotebookEnding
Cause Troubleshooting
The notebook is in energy saving mode. ► End energ y saving mode.
An application program has cau sed the
malfunction.
► Close the
application program or restart
the noteb
ook (by restarting the operating
system o
r sw itching the device off and back
on again
).
The bat
tery is dead.
► Connect the notebook to the power supply
via the AC adapter a nd charge the battery.
Fujitsu 83