Working with the notebook
Charging the stylus battery
The stylus contains a built-in battery, which is automatically charged when the stylus is fully inserted
in its slot. The stylus is also charged when the notebook is in power saving m ode or is switched off.
A charging time of approximately 15 seconds is sufficient to able to stylus to be used for 90 minutes.
► Insert the stylus fully into the slot.
After a charging period of approximately 5
minutes, the stylus battery is fully charged.
Adjust ing the stylus
Operating system Menu
Windows® 10 Pro,
Home and S
Under System Control - Hardware and Sound - Pen and Touch you can make
various settings for the stylus.
Calibrating the stylus
Before first use with the stylus, you must calibrate your Tablet PC via th e operating
system, so that it recognizes the stylus as accurately as possible.
You should also always repeat the calibration if the co-ordination between the
stylus and the cursor movement deteriorates.
Operating system Menu
Windows® 10 Pro,
Home and S
To calibrate, r un the Hardware and Sound / Tablet PC Settings function in the
Control Panel. You ne ed to calibrate both portrait and landscape formats.
Fujitsu 37
To Next Page
Loading...
