Working w ith the notebook
Using the touchscreen
You can execute commands as follows:
• using the stylus (supplied with your device).
• using your finger
Using your fingers
You can execute certain comm ands by using your finger tip on the touchscreen o f yo ur device.
Alternatively, everything which you can select or activate using your finger
tip can also be selected or activated using the stylus.
Calibrating the Dual Digitizer for finger-based operation of the device
Please see chapter "Calibrating the stylu s", Page 37 for instructions on how
to calibrate your device to use Dual Digitizer Technology.
Please note: The re are separate calibration programs available for calibrating
the stylus and for calibrating finger-based operation. Do not use the calibration
tool for the stylus to calibrate finger-based operation.
Using the stylus
Pen
2
3
5
4
1
1 = stylus tip
2 = stylus button (= eraser)
3 = stylus butt on (= r ight mouse button)
4 = charging contacts
5 = eyelet for optional stylus tether
You can d
ownload software that gives an overview of the stylus at:
"
http:
//www.fujitsu.com/us/support/"
34 Fujitsu