Security functions
Brief overview of the security functions
Detailed information about the security equipment of your system can be found
in the "Professional Notebook" manual, on the "Drivers & Utilities" CD/DVD
or on our website at "
http://www.fujitsu.com/us/su pport/".
Security function Type of protection
Preparation
Security Lock
Mechanical Fit and lock the Kensingto
n
Lock Cable (accessory).
Fingerprint sensor
(configuration depende
nt)
Biometric
Install the supplied software.
Palm sensor (configuration
dependent)
Biometric
Install the supplied software.
BIOS password protection Password protection for
the BIOS Setup, operating
system and hard disk with
supervisor and user password.
The pa sswords consist o f a
maximum of eight alphanumeric
characters.
Specify at least one supervisor
password in the BIOS Setup
and activate the p assword
protection for the operating
system and hard disk as
desired.
Boot from R emova
ble Media
Prevents unauthorized boo ting
of an operating system from
external media (e.g. USB stick,
USB CD-ROM drive, etc.).
In the BIOS Setup
,gotothe
Security menu a
nd edit the Boot
from Removabl
eMediaoption.
Owner Inform
ation
Display service desk or owner
information during the boot
process.
In the BIOS Se
tup, go to the
Security men
u and edit the
Owner I nfor
mation option.
Smart Card reader
(configuration-dependent)
PIN and SmartCard protection
for the operating s ystem
To use the SmartCard reader
functions, install the suitable
software.
Trusted Platform Module
(dependent on configuration)
Identification and authentication
of the notebook
Define a supervisor password
in the BIOS Setup and enable
the TPM (Security Chip).
62 Fujitsu
To Next Page
Loading...
