Working with the notebook
Hot Key Description
Decrease the brightness of the screen
This H ot Key reduces screen brightness.
DecreasebrightnessDecreas e
Increase screen brightness
This H o t Key increases screen brightness.
Increase
Energy saving functions*
This Hot Key activates the
function manager.
Energysavingf unctions
Switch between screen outputs*
Use this Ho t Key to select which screen(s) is/are used for display if an
external monitor is connected.
Screen output is possible:
• only on the LCD screen of the notebook
• on the LCD screen of the notebook and the external monitor at the
same time
• only on the external monitor
This setting is useful if you would like a high resolution an d a high
refresh r ate on an external monitor.
Fn+F10Switchbetweendi splayoutputs
Bilingual keyboard:
Create screenshot
With this Hot Key, a screenshot of the current screen image is created and
stored in the clipboard.
Bilingual keyboard:
Switch virtual n umber keys o n/o ff
This Hot Ke y switches the virtual number pad off or on. The characters
marked at the top right of the k eys are displayed.
* These fu
nctions are not available when the system is at high load.
Function keys
The sym
bols below the keys represent function keys.
They ar
e numbered from
F1
to
F12
.
The fu
nction keys a re used to activate functions of the operating system or applications directly.
Rega
rdless of the F-Lock setting, the function keys are the primary key function:
• unti
l Windows is loaded (after a system rebo ot).
The F-Lock setting, which w as last active before the syste m reboots, then
reappears (see chapter "
F-Lock settin g", Page 4 6).
• wit
h B IOS access during the PO S T phase: When during boot-up
Fn
+
F2
or
Fn
+
F12
are pressed, the BIOS menu is not called up. Here the
F2
or
F12
ke
y must be pressed without an additional key.
Fujitsu 45
To Next Page
Loading...
