Tro ubl eshooting and ti ps
Error message/cause Troubleshooting
Previous boot incomplete - Default configuration
used Default value s have been set for certain
settings because of a n error which occurred in
the previous system boo t. Check the settings in
the BIOS Setup.
► Press the
F1
function key when prom
pted
to do so.
Real time clock error
► Contact your sales outlet or
our customer
service center.
nnnnK Shadow RAM failed a
t offset: xxxx F ailing
Bits: zzzz
► Contact your sales outlet or our customer
service center.
System battery is dead - Replace and run SETUP
► Contact your sales outlet or our customer
service center.
System cache error - Cache disabled
► Contact your sales out
let or our customer
service center.
System timer error
► Contact your sales outlet or our customer
service center.
Fujitsu 87