ScanSnap S510 Operator's Guide xiii
WARNING
The following describes important warnings described in this manual.
Do not touch the AC cable with wet hands.
Do not damage the AC cable.
Use only specified AC cable, AC adapter, and connector cables
Use this scanner only at the indicated power voltage. Do not
connect to multiple-power strips.
Wipe any dust from the power plug.
Do not touch the power plug with wet hands. Doing so might cause electric
shock.
A damaged AC cable may cause fire or electric shock.
Do not place heavy objects on AC cables, or pull, bend, twist, heat, damage or
modify AC cables.
Do not use damaged AC cables or power plugs, and AC cables or power plugs
when the wall socket is loose.
Use only the specified AC cable, AC adapter, and connector cables. Failure to
use the correct cables might cause electric shock and equipment failure.
Do not use the AC cable, AC adapter, and connector cables provided with this
scanner for other devices, since this might cause equipment failure and other
troubles or an electric shock.
Use this scanner only at the indicated power voltage and current. Improper
power voltage and current might cause fire or electric shock.
Also, do not connect to multiple-power strips.
Wipe off any dust from metal parts on the power plug or metal fittings with a soft,
dry cloth. Accumulated dust might cause fire or electric shock.
To Next Page
Loading...
Need help?
General