5.4 Using the ScanSnap as a Copy Machine
ScanSnap S510 Operator's Guide 145
About Actions
5
Operation
3. Place the mouse cursor on [Scan2Print].
⇒ A description of the [Scan2Print] action is displayed.
4. When you want to change settings on the [Scan2Print] action, place the cursor on
the ( ) mark, and then click the [Setting] button .
(If you want to use default settings, go to step 6.)
⇒ The following dialog box appears.
In this dialog box, you can change settings on the [Scan2Print] action as follows:
"Keep data used for printing as files" checkbox
Printed document images are saved in PDF format.
PDF files are saved in a folder specified in the "Image saving folder" drop-down
list on the [Save] tab of the "ScanSnap Manager - Scan and Save Settings" dialog
box (page 75).
(By default, this checkbox is not marked.)
Show "Print" dialog checkbox
Before documents are printed, the print setup dialog box is displayed.
5. Click the [OK] button to close the "Scan2Print - Options" dialog box.
To Next Page
Loading...
