ScanSnap S510 Operator's Guide xv
CAUTION
The following illustrates important cautions described in this manual.
Do not install the scanner on unstable surfaces.
Firmly insert the power plug.
Do not block the ventilation ports.
Do not place heavy objects or climb on top of the scanner.
Before moving the scanner, unplug the power cord from the
electrical outlet.
Install the scanner on a flat, lever surface. Make sure none of the scanner parts
protrudes outside the desktop.
Do not install the scanner on unstable surfaces. Install the scanner on a level
surface that is free of vibration to prevent it from falling.
Install the scanner on a strong surface that will support the weight of the scanner
and other devices.
Firmly insert the power plug into the power outlet as far it can go.
Do not block the ventilation ports. Blocking the ventilation ports generates heat
inside of scanner, which may results in fire or scanner failure.
Do not place heavy objects on the scanner or use the top surface of the scanner
for performing other work. Improper installation might cause injuries.
Do not move the scanner with the power and interface cables connected as this
might damage the cables, causing fire, electric shock or injuries.
Before moving the scanner, be sure to disconnect the power plug from the power
outlet, and disconnect data cables. Also, make sure that the floor is free of
obstructions.
To Next Page
Loading...
Need help?
General