9.1 Replacing Consumables
ScanSnap S510 Operator's Guide 237
Replacing Consumables and Carrier Sheet
9
HINT
By the following procedure, you can create a rough guideline for replacing
consumables and for estimating how many sheets have been already scanned.
1. Right-click the ScanSnap Manager icon on the taskbar.
2. Click [Check consumable supplies] at the menu.
⇒ The window ("Check consumable status" screen) is displayed. This
window indicates how many times consumables have been used.
Replace consumables referring to "Target value to change supplies" as a rough
guideline.
For details about purchasing consumables, visit the following website or
contact the Fujitsu scanner dealer where you purchased your scanner.
[Website] http://scansnap.fujitsu.com/
S
S
To Next Page
Loading...
Need help?
General