7 Troubleshooting 83
E
The cartridge is not
ejected.
When it has been confirmed that a data cartridge cannot be ejected
using normal procedures " Manually ejecting a data cartridge"
(
Jpg.68) use the following procedures forcibly eject the data cartridge
as described in "2.2.3 How to use forcible ejection when the data
cartridge cannot be ejected" (
Jpg.70).
Drive Error LED is
blinking (Unrecoverable
error).
If possible, shutdown the server and restart.
Tape Error LED is
blinking (Media error).
• Check that the cartridge is correct.
• Check that the write-protect switch of the cartridge is set at the cor-
rect position (either write inhibit or write enable).
• Check that there is no damage to the cartridge.
• Perform cleaning and use a new cartridge.
Problem Solution
To Next Page
Loading...
