EasyManuals Logo

Fujitsu PRIMERGY LTO3 User Manual

Fujitsu PRIMERGY LTO3
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #85 background imageLoading...
Page #85 background image
Appendix A Operation Check Sheet(Installation/Operation Check) 85
E
Appendix A
Operation Check
Sheet(Installation/Operation
Check)
Tape Drv LTO3 Ultrium3 400GB is a precision instrument and improper daily operation (cleaning/
data cartridge management/ installation environment, etc.) will lead to troubles such as backup
failure.
We provide here an "Operation Check Sheet" to avoid troubles. The following items are
recommended operations by Fujitsu.
Classificat
ion
No Check Check item Description / tasks (*)
Cleaning
1
Is head cleaning
performed once
every three months?
Periodical cleaning is required as the magnetic head
accumulates dust or dirt regardless of the use of this
product. If soiled with dust or dirt, the magnetic head
may scratch the surface of the tape or reduce the life of
the data cartridge.
* Clean this product every three months.
2
Is cleaning
performed when the
Clean LED blinks?
This product provides a function that causes the Clean
LED to blinks when it judges that cleaning is required,
urging you to perform cleaning. If the product is used
while the Clean LED is blinking, the data cartridge and
backup data may be damaged. It is also possible that the
worn-out data cartridge will dirty the tape heads, etc.
* When the Clean LED blinks, immediately perform
cleaning. If the Clean LED blinks again, consider
replacing the data cartridge.
3
Is the replacement
cycle of the cleaning
cartridge set to the
replacement cycle of
the product (per 50)?
The cleaning cartridge is required to be replaced either
after being used 50 times or after five years of use,
whichever is earlier.
* Replace the cleaning cartridge periodically according
to the operations.
4
When the inserted
cleaning cartridge is
automatically
ejected and the Tape
Error LED is blink-
ing, is the cleaning
cartridge replaced?
When the cleaning cartridge is automatically ejected and
the Tape Error LED is blinking, the cleaning cartridge
has been used up.
* Replace the cartridge with a new data cartridge.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu PRIMERGY LTO3 and is the answer not in the manual?

Fujitsu PRIMERGY LTO3 Specifications

General IconGeneral
BrandFujitsu
ModelPRIMERGY LTO3
CategoryStorage
LanguageEnglish

Related product manuals