TX150 S7 Operating Manual 51
Hardware installation Installing/removing the rack model
Ê Insert (3) the safety lock into the easy lock (snap fit).
V CAUTION!
Ensure that the safety lock has been inserted before the server is
inserted!
Ê Repeat the above steps for the right-hand support system (with the front and
rear right support uprights).
Ê Fit the PRIMECENTER/DataCenter rack cable management as described in
the technical manual for the corresponding rack.
Figure 6: Position of the cage nuts
Ê Fit the cage nuts for securing the server in the corresponding catches on the
right and left support uprights.
Ê Insert the server (see "Inserting the server" on page 51).
Inserting the server
I For the Japanese market:
Refer to the "Rack Mounting Guide" for more detailed explanation and for
other support systems.
1
5
10
15
14 14
To Next Page
Loading...
