ADF Paper Chute (Cover)
ADF Top Section
a It clicks when it returns to its original position.
7. Connect the power cable to the AC outlet, and turn on the ScanSnap.
8. Reset the roller set count.
1.
Right-click the ScanSnap Manager icon in the notification area located at the far right
of the task bar and select [Check consumable status] from the "Right-Click Menu" (page
43).
a The [ScanSnap Manager - Check consumable status] window appears.
2. Click the [Reset] button for [Roller Set Count].
a A confirmation window appears.
3. Click the [Yes] button.
a [Roller Set Count] is reset to 0.
Replacing Consumables
133
To Next Page
Loading...
