9. Open the ADF paper chute (cover)/feed guide to turn on the ScanSnap.
aThe ScanSnap Manager icon appears in the notification area. Make sure that the
displayed icon is .
If the problem persists, refer to "If you have installed the software before" (page 14). If the problem still
persists, perform the procedures described in "When ScanSnap Manager does not operate normally"
(page 25) once again.
If the above procedures do not solve the problem, please attach the data of your system information to an
email and send it to your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider.
For details about how to collect system information, refer to "Troubleshooting" in ScanSnap Manager Help.
When ScanSnap Manager does not operate normally
29
To Next Page
Loading...
