8. Confirm that the installation folder no longer exists.
If the [ScanSnap] folder remains in the following location, rename the folder (e.g. [-
ScanSnap]). This folder can later be deleted once the installation is successfully
completed.
Path: Drive name (e.g. "C"):\Program Files\PFU
After completing the procedure, proceed to the next topic "Installing the software from the [ScanSnap
Setup] dialog box" (page 20).
Installing the software from the [ScanSnap Setup]
dialog box
Once you have uninstalled the software or removed the installation information, install the
software from the [ScanSnap Setup] dialog box.
Install the software in the following procedure.
1. Restart your computer.
2. Log on as a user with Administrator privileges.
3. If an anti-virus software is running, disable the software temporarily.
ATTENTION
If you cannot disable the anti-virus software, check if the software is set to lock the application.
4. Insert the Setup DVD-ROM into the DVD-ROM drive.
aThe [ScanSnap Setup] dialog box appears.
HINT
If the [ScanSnap Setup] dialog box does not appear, double-click "ScanSnap.exe" in the Setup
DVD-ROM via Windows Explorer.
If you have installed the software before
20
To Next Page
Loading...
