The following software is installed at the same time as the above software:
● ScanSnap Online Update
The procedure is as follows.
1. Turn on the computer and log on as a user with Administrator privileges.
2. Insert the Setup DVD-ROM into the DVD-ROM drive.
aThe [ScanSnap Setup] dialog box appears.
HINT
If the [ScanSnap Setup] dialog box does not appear, double-click "ScanSnap.exe" in the Setup
DVD-ROM via Windows Explorer.
3. Click the [Install Products] button.
aThe [Install Products] dialog box appears.
Installing in Windows
41
To Next Page
Loading...
