11. Follow the instructions on the screen to check the connection between the
ScanSnap and the computer.
aWhen the connection confirmation is complete, the [ScanSnap Wireless Network
Setup] screen appears.
12. Select whether you want to configure the wireless settings for connecting the
ScanSnap and the mobile device via wireless LAN.
To configure the wireless settings, click the [Setup Now] button, and then follow the
instructions on the screen. For details of each screen, click the [ ] button.
Otherwise, click the [Later] button.
HINT
If you want to configure the wireless settings for connecting the ScanSnap and the mobile device
via wireless LAN at another time, refer to the Operator' s Guide.
Installing in Mac OS
62
To Next Page
Loading...
