Fujitsu ScanSnap S1300i

Connecting the ScanSnap via Wireless LAN
(iX1600 / iX1500)
By connecting the ScanSnap to a computer or a mobile device via wireless LAN, you can scan
documents.
Select one of the following wireless modes to connect the ScanSnap to the computer or mobile
device.
l Access Point Connect mode
When a wireless LAN environment has already been configured, the ScanSnap and the
computer or mobile device are connected via a wireless access point.
l Direct Connect mode
When a wireless LAN environment has not been configured or the ScanSnap cannot establish a
connection to a wireless access point, the ScanSnap and the computer or mobile device are
connected directly via wireless LAN.
The wireless mode can be switched from the touch panel of the ScanSnap.
l "Preparations for Connecting the ScanSnap via Wireless LAN (iX1600 / iX1500)" (page 116)
l "Connecting the ScanSnap to a Wireless LAN (iX1600 / iX1500)" (page 117)
l "Connecting the ScanSnap to a computer or mobile device via Wireless LAN (iX1600 / iX1500)"
(page 122)
Connecting the ScanSnap via Wireless LAN (iX1600 / iX1500)
115