Fujitsu ScanSnap S1300i User Manual

Checking Whether a Setting for the ScanSnap Has Been
Changed or Not (iX1600 / iX1500)
If the setting for [Display of profiles] on the ScanSnap is changed to [All users] or [Connected user],
establishing a connection with the ScanSnap may fail or another problem may occur.
Reset the setting for [Display of profiles] on the ScanSnap to [Selected user] and connect the
ScanSnap to the computer again.
1. Check the setting for [Display of profiles] on the ScanSnap and change it if
needed.
1.
Press in the home screen on the touch panel of the ScanSnap to display the
[Settings] screen.
2.
Press to display the [Scanner settings] screen.
3. Press [Display of profiles] to display the [Display of profiles] screen.
4. If [All users] or [Connected user] is selected, change it to [Selected user].
HINT
l If [All users] is set for [Display of profiles] and the ScanSnap and the computer are
connected via the USB cable, unplug the USB cable, then plug it back in. Once the USB
cable is plugged back in, the setting for [Display of profiles] is changed to [Selected user],
and the connection between the ScanSnap and the computer is established. Make sure
to leave at least 5 seconds between unplugging and plugging the cable.
l When you also use ScanSnap Home to operate the ScanSnap, ScanSnap Home shows
a message indicating that the setting for [Display of profiles] has been changed to
[Selected user].
5. Press to return to the home screen.
2. When connecting the ScanSnap to a computer via wireless LAN, establish a
connection in the following procedure.
1.
Right-click the ScanSnap Manager icon
in the notification area located at the far right
of the taskbar and select [Connect by Wi-Fi] from the "Right-Click Menu" (page 87).
a The [ScanSnap Manager - Connect by Wi-Fi] window appears.
2. From the list of the ScanSnap units to be connected, select the ScanSnap that you want to
connect, and click the [Connect] button.
Troubleshooting When You Cannot Connect to the ScanSnap (iX1600 / iX1500)
177

Fujitsu ScanSnap S1300i Specifications

General

Film scanning	-
Color scanning	Yes
Input color depth	- bit
Maximum scan size	216 x 863 mm
ADF scan speed (b/w, A4)	- ppm
ADF scan speed (color, A4)	12 ppm
Optical scanning resolution	600 x 600 DPI
Scanner type	ADF scanner
Product color	Black, Silver
Built-in display	No
Scan to	File, Image
Sensor type	Dual CIS
Scan drivers	ScanSnap
Daily duty cycle (max)	- pages
Auto document feeder (ADF) input capacity	10 sheets
Maximum scan area (ADF)	216 x 360 mm
Minimum scan area (ADF)	50.8 x 50.8 mm
ISO A-series sizes (A0...A9)	A4, A5, A6, A8
ISO B-series sizes (B0...B9)	B5, B6
Scanning media types supported	Business Card, Envelopes, Photo paper, Plain paper
Maximum ISO A-series paper size	A4
Auto Document Feeder (ADF) media weight	64 - 104.7 g/m²
USB version	2.0
Standard interfaces	USB 2.0
Mac operating systems supported	Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks
Windows operating systems supported	Windows 10 Education, Windows 10 Education x64, Windows 10 Enterprise, Windows 10 Enterprise x64, Windows 10 Home, Windows 10 Home x64, Windows 10 Pro, Windows 10 Pro x64, Windows 7 Enterprise, Windows 7 Enterprise x64, Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 8, Windows 8 Enterprise, Windows 8 Enterprise x64, Windows 8 Pro, Windows 8 Pro x64, Windows 8 x64, Windows 8.1, Windows 8.1 Enterprise, Windows 8.1 Enterprise x64, Windows 8.1 Pro, Windows 8.1 Pro x64, Windows 8.1 x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Enterprise, Windows Vista Enterprise x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Professional
Input voltage	100-240 V
Power supply type	AC/USB
AC input frequency	50 - 60 Hz
Power consumption (standby)	5 W
Power consumption (typical)	9 W
Storage temperature (T-T)	20 - 80 °C
Operating temperature (T-T)	5 - 35 °C
Sustainability certificates	ENERGY STAR
Certification	RoHS
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	99 mm
Width	284 mm
Height	77 mm
Weight	1400 g