Fujitsu ScanSnap S1300i

Connecting the ScanSnap to a Wireless LAN
(iX1600 / iX1500)
To connect the ScanSnap and a computer or a mobile device in Access Point Connect mode,
connect the ScanSnap to a wireless access point.
HINT
When you cannot connect the ScanSnap to a wireless access point, use Direct Connect mode to
connect the ScanSnap to a computer or a mobile device directly.
For details, refer to the following:
l "Connecting the ScanSnap to a Computer Directly in Direct Connect Mode (iX1600 / iX1500)"
(page 126)
l "Connecting the ScanSnap to a Mobile Device in Direct Connect Mode (iX1600 / iX1500)" (page
128)
l "Connecting the ScanSnap to a Wireless Access Point by Using the ScanSnap Wireless Setup
Tool (iX1600 / iX1500)" (page 118)
l "Connecting the ScanSnap to a Wireless Access Point from the Touch Panel (iX1600 / iX1500)"
(page 119)
Connecting the ScanSnap to a Wireless LAN (iX1600 / iX1500)
117