EasyManuals Logo
Home>Fujitsu>Scanner>ScanSnap S1300i

Fujitsu ScanSnap S1300i User Manual

Fujitsu ScanSnap S1300i
514 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #478 background imageLoading...
Page #478 background image
Replacing Consumables for iX500
The Roller Set consists of the brake roller and pick roller.
Replace each roller in the following procedure:
l Before replacing consumables, you must turn off the ScanSnap and unplug
the power cable from the AC outlet. Not doing so may cause fire or electrical
shock.
l Do not place internal parts such as the brake roller and the pick roller within
reach of small children. Doing so may cause injury.
ATTENTION
The bottom part of the ScanSnap may become hot when the ScanSnap is being used but this does not
affect ScanSnap operation or cause any physical harm. Be careful not to drop the ScanSnap when
carrying it.
1. Unplug the power cable from the AC outlet.
2. Remove any documents from the ADF paper chute (cover).
3. Pull the ADF release tab towards you to open the ADF top section.
ADF Paper Chute (Cover)
ADF Release Tab
ADF Top Section
4. Replace the brake roller.
1. Open the brake roller cover.
Hold both ends of the cover, and open it in the direction of the arrow.
Replacing Consumables for iX500
478

Table of Contents

Other manuals for Fujitsu ScanSnap S1300i

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu ScanSnap S1300i and is the answer not in the manual?

Fujitsu ScanSnap S1300i Specifications

General IconGeneral
Film scanning-
Color scanningYes
Input color depth- bit
Maximum scan size216 x 863 mm
ADF scan speed (b/w, A4)- ppm
ADF scan speed (color, A4)12 ppm
Optical scanning resolution600 x 600 DPI
Scanner typeADF scanner
Product colorBlack, Silver
Built-in displayNo
Scan toFile, Image
Sensor typeDual CIS
Scan driversScanSnap
Daily duty cycle (max)- pages
Auto document feeder (ADF) input capacity10 sheets
Maximum scan area (ADF)216 x 360 mm
Minimum scan area (ADF)50.8 x 50.8 mm
ISO A-series sizes (A0...A9)A4, A5, A6, A8
ISO B-series sizes (B0...B9)B5, B6
Scanning media types supportedBusiness Card, Envelopes, Photo paper, Plain paper
Maximum ISO A-series paper sizeA4
Auto Document Feeder (ADF) media weight64 - 104.7 g/m²
USB version2.0
Standard interfacesUSB 2.0
Mac operating systems supportedMac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks
Windows operating systems supportedWindows 10 Education, Windows 10 Education x64, Windows 10 Enterprise, Windows 10 Enterprise x64, Windows 10 Home, Windows 10 Home x64, Windows 10 Pro, Windows 10 Pro x64, Windows 7 Enterprise, Windows 7 Enterprise x64, Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 8, Windows 8 Enterprise, Windows 8 Enterprise x64, Windows 8 Pro, Windows 8 Pro x64, Windows 8 x64, Windows 8.1, Windows 8.1 Enterprise, Windows 8.1 Enterprise x64, Windows 8.1 Pro, Windows 8.1 Pro x64, Windows 8.1 x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Enterprise, Windows Vista Enterprise x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Professional
Input voltage100-240 V
Power supply typeAC/USB
AC input frequency50 - 60 Hz
Power consumption (standby)5 W
Power consumption (typical)9 W
Storage temperature (T-T)20 - 80 °C
Operating temperature (T-T)5 - 35 °C
Sustainability certificatesENERGY STAR
CertificationRoHS
Harmonized System (HS) code84716070
Weight and Dimensions IconWeight and Dimensions
Depth99 mm
Width284 mm
Height77 mm
Weight1400 g

Related product manuals