Fujitsu ScanSnap S1300i

Changing the Frequency for Connecting the ScanSnap (iX1600 /
iX1500)
Change the setting of the frequency for connecting the ScanSnap which is used when the scanner is
connected to a wireless access point.
HINT
In some regions, a 5 GHz wireless LAN cannot be used.
If you are using the ScanSnap in the region where a 5 GHz wireless LAN cannot be used, you cannot
change the frequency for the connection.
1. Press in the home screen on the touch panel of the ScanSnap to
display the [Settings] screen.
2. Press to display the [Wi-Fi settings] screen.
3. Press [Access point connection] to display the [Access point connection]
screen.
4. Press [Frequency for the Connection] to change the frequency for the
connection.
5. Press to return to the home screen.
Changing the Wireless LAN Connection Method (iX1600 / iX1500)
159