Fujitsu ScanSnap S1300i

Rubber Idler Roller (x2)
Ultrasonic Sensor (x2)
Brake Roller (x1)
Pick Roller (x1)
Plastic Idler Roller (x2)
When cleaning, be careful not to damage the document sensor with a
cloth.
The body of the ScanSnap may vary in color depending on the region
where you purchased the ScanSnap.
l Brake roller (× 1)
Remove the brake roller from the ScanSnap to clean them.
For details about how to remove the brake roller, refer to "Replacing Consumables for
iX1600 / iX1500 / iX1400" (page 471).
Gently wipe off the dirt and dust along the grooves on the roller surface.
Be careful not to damage the surface of the rollers.
Cleaning iX1600 / iX1500 / iX1400
437