Fujitsu ScanSnap S500M - Cleaning the Scanner Exterior & Stacker

6.2 Cleaning the Scanner Exterior & Stacker
ScanSnap S500M Operator's Guide 89
Daily Care
6
6.2 Cleaning the Scanner Exterior & Stacker
Clean the scanner exterior and the stacker with a cloth moistened with a small amount of Cleaner
F1 (isopropyl alcohol) or any neutral detergent.
ATTENTION
• Do not use paint thinner or other organic solvents.
• When cleaning, prevent water or moisture from getting inside the scanner.
• Do not use compressed air; using it may cause dirt and dust to enter the scan-
ner, which may result in scanner failure and malfunction.
Cloth
Cleaner F1 or
neutral detergent
Paint thinner