Fujitsu ScanSnap S500M - Installing Adobe Acrobat

8
■ Installing Adobe Acrobat
Install Adobe Acrobat from the "Adobe Acrobat 7.0 CD-ROM" supplied with the scanner,
following the procedures below.
Prepare the Adobe Acrobat 7.0 CD-ROM.
1. Insert the
"Adobe Acrobat 7.0 CD-ROM" into the CD-ROM drive.
⇒ The "Adobe Acrobat 7.0 Standard" window appears.
ATTENTION
System requirements for "Adobe Acrobat 7.0 Standard":
• OS: Mac OS X v10.2.8, v10.3, or v10.4.
• Screen Resolution: 800 x 600 or higher
* For further details, please visit Adobe Web Site at:
http://www.adobe.com
HINT
Adobe Acrobat is required for displaying the "ScanSnap S500M Operator’s
Guide."
Adobe Acrobat can also interact with ScanSnap so that scanned images are
displayed with Adobe Acrobat.
* You do not have to install Adobe if it is already installed on your computer.
⇒ Proceed to "Installing ScanSnap Manager" (page 11).