3.5 Various settings according to your needs
ScanSnap S500M Operator's Guide 59
Basic Scanner Operations
3
3. Mark the [Correct skewed character strings automatically] checkbox.
4. Click the [OK] button and close all the windows.
⇒ The setting takes effect the next time you scan documents.
ATTENTION
Up to +/-5 degrees of skew can be corrected.
This function detects a skew of the document based on the character
strings on each sheet. Therefore, the detection may fail if the following
kinds of documents are scanned:
• Documents on which the pitches of lines or characters are extremely
narrow, or adjacent characters contact with each other
• Documents with many outlined or decorated characters
• Documents with many photographs or figures and fewer characters
• Documents with characters in patterned background
• Documents with characters printed in various directions (e.g. plans)
• Documents with long diagonal lines
• Documents with handwritten characters
*When you scan such documents, clear the checkbox.
To Next Page
Loading...
Need help?
General