EasyManua.ls Logo

Fujitsu STYLISTIC Q584 - Using the Stylus

Fujitsu STYLISTIC Q584
101 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Working with t he Tablet PC
Using the stylus
Stylus
1
2
3
1 = stylus tip
2 = stylus b utton (= right mouse bu tton)
3 = eyelet for stylus tether
You can use the stylus o n your Tablet PC as an electronic writing tool, to select m enu items, and to
navigate through the programs. Programs that support handwriting recognition also allow you to
write directly on the screen with the stylus. You ca n also use the stylus as a drawing too l.
The Tablet PC is supplied with a stylus tether which you can attach to the
eyelets on the stylus and on the Tablet PC.
Use only the stylus that was provided with your Tablet PC. Do not use any other pointed
object as a substitute, th at was not specially designed for your Tablet PC. Replace
the stylus tip if it is worn. The warranty does not cover a scratched screen.
While writing, take care that you do not scratch the surface of the
display (e.g. with a wristwatch or bracelet).
The stylus of th
e Tablet PC is a n electronic instrument that can be damag ed
if used imprope
rly. Handle the stylus with care.
Our recommend
ations for proper handling of the stylus are as follows:
Do not gestur
e with the stylus.
Do not u se the stylus as a pointer.
•Donotuseth
e stylus on surfaces o ther than the screen of the Ta blet P C.
Do not try to turn the grip of the stylus. The grip is u sed to put the
stylus into its s lot and to take it out of its slot.
Never stor
e the stylus with its w eigh t on the tip (e.g. with the tip down in a stylus
containe
r). If the stylus is stored with the tip pointing down, this ma y have a n
adverse e
ffect on the stylus mechanism (particularly under high temperatures). In
this cas
e the stylus tip m ay react as though it is constantly being pressed down. To
avoid da
mage, the stylus should be stored in the stylus slot when not in use.
The s tylus can be inuenced by electromagnetic elds (cursor quivers or
jumps). There may be a few areas on the screen where the cursor quivers
slightly in spite of pressing the stylus do wn rmly.
The screen responds to entries made with the tip of the nger o r the stylus when th e
tip of the nger or the stylus directly touches the screen.
You can use the st ylus to perform almost all func tions for which you would otherwise use a mouse.
Fujitsu 31

Table of Contents

Other manuals for Fujitsu STYLISTIC Q584

Related product manuals