Appendix
Installing the Software after the Recovery Image is Restored
Auto-installation support for essential access software
from hidden partition
The below listed steps are applicable only in cases in which the recovery image restore
and hidden partition contents have not been wiped out.
1. After the recovery image is restored, launch the desktop icon “Fujitsu Software Auto Installer”.
2. Double-click on “Fujitsu Software Auto Installer” desktop icon.
3. Click Yes on User Account Control Dialog box. This will take s ome time to
process the software packages. A me ssage will be displayed during this time,
“Please wait while the content is being processed”.
4. If EULA is d isplayed for Fujitsu Software Auto Installer, accept the EU LA, otherwise continue.
5. Then Fu jitsu Software Auto I nstaller user interface will be launched providing ability
to auto-in stall the essential access software on the system.
6. It is recommended that you install all the software in the listed order. You can
Select All, to install the software in the order listed.
7. Click Install to start the installation.
8. After installing all the s elect ed drivers, Installation Results window will be displayed. Click OK.
9. “You must restart the system for the settings to take effect. Do you wish to
reboot now?” message appears. Select Yes.
10. The system will now r eboot.
11. You can now connect to the internet and download F S DM (Fujitsu Software Download
Manager) from the support site and download all the software applicable to the
model and OS using FSDM if they are not downloaded yet.
94 Fujitsu
To Next Page
Loading...
