Fujitsu STYLISTIC Q584 - Stylus Input Not Working; The Tablet PC Does Not Start after Switch on; The Tablet PC Stops Working

Troubleshooting and tips
Stylus input not working
Cause
Troubleshooting
Incorrect driver installed.
► If your device is one which can only be
operated using the stylus, insta ll the driver
for the standard model.
or
► If your device is one which can be
operated using the stylus and by finger,
install the driver fo r the "Dual Digitizer"
model.
The Tablet PC does not start after switch on
TabletPC
Cause Troubleshooting
The battery is discha rged.
► C harge the battery.
or
► C onnect the AC adapter to the Tablet
PC.
The AC adapter is no t properly connected. ► C heck whether the AC adapter is properly
connected to the Tablet PC .
► Switch th e Tabl
et PC on.
The Tablet PC stops working
TabletPCEnding
Cause Troubleshooting
The Tablet PC is in energy saving mode.
► End energy saving mo de.
An application program has caused the
malfunction.
► Close the application program or restart
the Tablet PC (by restarting the operating
system or sw itching the device off and back
on again).
The battery is discha rged.
► C harge the battery.
or
► C onnect the AC adapter to the Tablet
PC.
Fujitsu 73