Troubleshooting and tips
The printer does not print
Printerdoe s notprint
Cause Tro ubleshooting
The printer is not switched on. ► Make sure that the printer is sw
itched
on and ready for operation (ref
er to the
documentation supplied with t
he printer).
The printer is not connected c
orrectly.
► Check that the data cab le between the Tablet
PC and the printer is properly connected.
The printer driver is faulty or not correctly
installed, or it is the wrong p rinter driver.
► Check that the data cab le between the Tablet
PC and the printer is properly connected.
► Ch eck whether the correct printer driver is
loaded (refer to the printer documentation).
The w ireless connect
ion to a network does not work
Thewireless conne
ctionto a network doesnotw ork
Cause Tro ubleshooting
The wireless component is switched off. ► Switch the w ireless componen t on (see
"
Switching the wireless components on and
off", Page 40).
The wireless c ompo nent is switched on. Despite
this, the wireless connection to a n etwork does
not work.
► Check whether the wireless connection is
enabled by the software.
► Further information on using the wireless
component can be fou nd in the help files.
The battery di
scharges too quickly
Battery
Cause
Troubleshooting
The battery i
s e ither too hot or too cold. In this
case the batt
ery indicator flashes.
► Bring the Tablet PC up/down to a normal
operating temperature again.
► If the operating time of the ba ttery life is
extremely short, the battery is probably too
old. Replace the battery if necessary.
You may have an application r unning that
consumes a great deal of power due to frequent
accessing of the hard disk or optical drive.
► Use th e AC adapter whenever possible.
The m aximum brightness may have been set
for the screen.
► Re duce the brightness of the scree n to
lower energy consumption: You will find the
setting under Control Panel – Hardware and
Sounds – Windows Mo bility Center.
74 Fujitsu
To Next Page
Loading...
