Fujitsu WATERSTAGE 112 - User Interface; Control Terminal; Room Unit

Heat Pump, Split System, Single Service, 3 phase
12 Maintenance Document 1394-1
2.2 Control Terminal
2.2.1 Room Unit
The room thermostat gives the user access to the
following basic functions:
• Adjustment of the room temperature setting by
simply turning the knob
• Selection of the heating mode
• Switching to comfort temperatures by simply
actuating the occupancy switch.
In addition, the room thermostat shows the user the
following information:
• the current temperature
• the heating mode
• the presence of a fault, when displaying the
symbol
2.2.2 User Interface
DHW function Select heating mode
Display information
Confirm setting
Activate cooling mode, off if
cooling option is not
available
Reset key
Navigation and
adjustment
Exit menu
Outdoor sensor:
2 x 0.5² cable
Service
p
lu
g
(
BSB
)
Select heating
mode
Room temperature setpoint control
knob
Occupancy key / day
ni
g
ht switch