Heat Pump, Split System, Single Service, 3 phase
Maintenance Document 1394-1 129
11.4.2 Remote control
The remote control includes the functions of the room
unit together with those of the user interface mounted
in series on the Hydraulic Unit.
It can be used, therefore, not only to measure the
room temperature, but also to view the operating
status of the heat pump, to enter the pump settings
appropriate to the house and to the application's
hydraulic circuit.
Installation
Select heating mode
Select DHW mode
Exit setting
Confirm setting
Adjust Comfort temp setpoint
Navigation and settings.
Occupancy key
Display information
To Next Page
Loading...
