Full Swing KIT - KIT Placement

1. Fully extend the rear leg of the KIT.
2. Place the KIT on level ground 10-feet directly behind the ball/tee posion and in-line
with the target.
Note: The target line can be displayed in the Full Swing app or on the OLED screen
on the unit.
• To view the target line on the Full Swing app, see Starng a Pracce Session.
• To view the target line on the OLED screen of the unit, see Using the KIT Without the App.
3. Conrm the KIT is lined-up with the intended target and that there are no obstrucons.
Note: Hing the ball from outside the target line or with obstrucons may result in missing
or misrepresented data.
KIT PLACEMENT
X
X