Full Swing KIT - Setting Up the KIT; Charge the KIT; Download the Full Swing App

Cauon: Use only the equipment provided with the KIT. Using non-product specic
chargers and cables may result in damage to the KIT.
1. Gently open the rubber charging port cover on the le side of the KIT, then aach the
charging cable.
2. Insert the charging cable into the charger and insert the other end of the charger into the wall.
Note: Charging begins automacally and may take up to 5 hours.
Note: It is possible to pair and congure the KIT while charging.
The Full Swing app is compable with Apple iPhone® and
iPad® running iOS 14 or higher.
Download the app by QR Code or through the Apple App Store.
QR Code
1. Open the iPhone/iPad camera to be paired with the KIT.
2. Hold the camera over the QR Code so that the QR Code
is clearly visible in the screen.
Note: The camera should automacally scan the QR Code.
3. Follow the Apple App Store prompts.
Apple App Store
1. Open the iPhone/iPad to be paired with the KIT.
2. Click hp://appstore.com/fullswing, or open the Apple App
Store, then search for Full Swing.
3. Select the Full Swing app, then click Get.
4. Follow the Apple App Store prompts.
SETTING UP THE KIT
CHARGE THE KIT
DOWNLOAD THE FULL SWING APP