Furuno FAR-2807 Series - Processor Unit: RPU-013

1.2 Configuration
1-8
1.2.2 Processor unit: RPU-013
As for FAR-2xx7 series, the processor unit (RPU-013) is commonly used. However,
PWR board and TX-HV board are different.
- PWR board depends on Power source and antenna motor type: Antenna revolution.
- TX - HV board depends on the output power (12 kW or 25 kW more).
Fig. 1.2.1 Connection of Processor Unit
U-AIS
GYRO
AD-100(AD Format)*
LOG(IEC61162-1)
IEC61162-2
NAV(IEC61162-1)
HDG Sensor(IEC61162-2)*
ALM/ALM ACK
RS-232C
INS
(ECDIS)
PC
Track control
Network
Master Radar
Monitor
- MU-201CR
- MU-231CR
Key
STD Control unit
(RCU-014)
Trackball
Control unit
(RCU-015)
Remote
Control unit
(RCU-016)
GC-10
Sub display-1
(Full-log)
LAN
Rem
Rem
Rem
Pro
Pro
Pro
or
or
DVI-D
Monitor
- MU-201CR
- MU-231CR
DVI-D
RPU-013
RPU-013
RPU-013
Card I/F
(CU-200)
(100Base-T)
HUB-100
(Max. 8 port)
100VAC
100VAC
Radar No. 1 - 8
2 slots
Video/HD/BP/Trig
Video/HD/BP/Trig
Sub display-2
(Semi-log)
Video/HD/BP/Trig
DVI RGB I/F
RGB Buff
RGB EXT. Monitor
DSUB-BNC
Convertor
R/G/B/V/H
(75 ohm Co-X x5)
100/220VAC
100/220VAC
440VAC
RU-1803
24VDC
24VDC
RU-3424
03P9339-
A/B/C/D
03P9338-
A/B/C/D
AC PWR
DC PWR
Ship’s ALM System
ALM
ALM
Scanner unit
PSU-007
*AD-100 or HDG Sensor
25msec
VDR
Option
Option
Option
ANT unit / TR unit
(Total L. 31.5m)
(5/10m)
(5/10m)
(Max. 100m)
ECDIS
or
(0.85m)