6.2 FACTORY TEST
6-19
3. Press the [F1] key to the next screen.
4. Beeps sound and the screen is changed to red (8 patterns). Press the [F1] key to stop
beeps, then the beeps stop and the green pattern is displayed on the screen. Every
time you press the [F1] key, the screen is changed to blue, white and then black.
Press the [F1] key to return to the radar screen.
Fig. 6.2.2 Screen Test
6.2.2 Contents
FPGA program numbers and version of RFC board
The FPGA program numbers of the SPU board and RFC board is displayed.
1 2 3
004F 0007 0004
0009 001F
Table 6.2.1 FPGA Program Numbers and Version of RFC Board
Display 1 2 3
SPU U46: SPU FPGA Ver U12: Echo FPGA Ver U13: DRW FPGA Ver
RFC
Note:
Displays version of the RFC board
by HEX and make the version
setting on JP3 to 6.
JP3 (BREV 0: 1), JP5 (BREV 1: 2)
JP6 (BREV 2: 4), JP4 (BREV 3: 8)
U17: FPGA Ver
Red pattern plus beeping Green pattern
White
Blue pattern
Black
Display No.
Version of FPGA on SPU board
Version of RFC board and version of FPGA
To Next Page
Loading...
