Furuno FAR-2807 Series - 3.11 Past Position Display; Displaying and erasing past position points, choosing past position plot interval

2.5 Optional Unit
2-40
2.5 Optional Unit
Fig. 2.5.1 Card Interface Unit, CU-200
Fig. 2.5.2 CU-200 with Cover Removed
When two CU-200s are installed, o
n
S1-#4 2nd units is set to ON.
S1 (DIP SW)
#1: INIT #3: IP1
#2: IP2 #4: IP0
CR2 (U12 CPU RUN,
Blinks every second.)
CARD CPU Board
(03P9333)
NET-100 Board
(03P9332)
Port A
Port B
Mini Card Slot (x2) for
C-MAP, NAVIONICS,
and FURUNO chart card.
LAN Port
(100BASE-T)
Power Supply
(12 VDC)