Furuno FAR-2807 Series - Output of RGB BUFF Board on FAR-2127

4.10 Setting of RGB BUFF Board: 03P9229B
4-56
Note: Differences of each RGB BUFF Board
Table 4.10.2 Setting of RGB BUFF Board
Board
Parts
03P9229
(FR-1500III,
FR-1700)
03P9229A
(FR-2xx5)
03P9229B
(FAR-2xx7)
R9 560 ohm 560 ohm 390 ohm
R10 560 330 390
R12 560 560 390
R13 560 330 390
R15 560 560 390
R16 560 330 390
R20 Not required 75 75
R21 Not required 75 75
R22 Not required 75 75
Label print None A B
4.10.2 Output of RGB BUFF board on FAR-2127
Fig. 4.10.4 V-SYNC Signal Waveform
Fig. 4.10.5 H-SYNC Signal Waveform
0 V
1.3
0 V
4.5
15 us
0 V
4.5
17 ms
RGB BUFF board
[J5]-B to “Retain”.
RGB BUFF board
[J4]-B to “Retain”.
Fig. 4.10.3 Video Signal Waveform
Note:
Each signal is measured under unloade
d
condition.