Furuno FAR-2807 Series - Page 12

2. 30 kW TR UP modification
5
2.3 Addition of EMI core to the interconnection cable between
RFC and IF board.
Use M3 x 12 screw and fix the EMI core with cable clump.
2.4 Adhere the microwave absorbent inside the MD cover as in Fig. 8
Adhere the microwave absorbent inside the MD cover. Keep 75 mm of clearance from
top of the cover.
Fig. 2.8 MD cover
Fig. 2.7
Fig. 2.6
EMI core w/cable clump
and screw
microwave absorbent
75 mm