Furuno FAR-2807 Series - Page 375

7.3 Processor Unit: RPU-013
7-31
Table
7.3.1(2/2) Connector on the TB board
TB board (03P9342) connector No. Overview
J618 (8P-NH) SUB DISPLAY-2
Connector for Video, HD, B.P and Trigger output signals from
master radar. Video signal is in SEMI-LOG.
J619 (3P-WAGO) ECDIS
TTM output of IEC61162-1 type. For outputting TTM, set
[Menu] -> 0 -> 6 -> 2:TTM OUTPUT to REL/TRUE and
[Menu] -> 0 -> 8 -> 5:Other to OFF
J620 (5P-WAGO)
TRACK
CONTROL
Connector to INS. Set [Menu] -> 0-> 8 -> 5 to Serial.
IEC61162-1 and 2 type. Supports the TX and RX data speed
between 4800 bps to 38.4 kbps according to input data speed
and automatically switched.
J621 (6P-WAGO) SERIAL I/F Unassinged
J622 (2P-XH) KEY Connected in parallel like EXT ALM Ack of J612 (EXT. ALM)