8-4
8.8 Alarm Information
When an alarm setting has been violated the
buzzer sounds and the speaker icon appears.
You can see which alarm has been violated, as
well as silence the buzzer, on the alarm menu
display.
1. Press the [ALARM] key.
DGPS 3D
ALARM1
EDIT
CLEAR
ALARM
ALARM INFORMATION
AUDIO ALARM
ARRIVAL ALARM
ANCHOR ALARM
PROXMTY ALARM
XTE ALARM
SPEED ALARM
ON
ON 0.100nm
ON 0.050nm
ON
ON 0.100nm
OVER/UNDER
12.5 ~ 15.0kt
YOU HAVE ARRIVED AT
WAYPOINT : SP-001.
Alarm information
(Example: Arrival alarm)
▼
Alarm menu
2. Press the CLEAR ALARM soft key to
silence the buzzer.
Note: If more than one alarm has been
violated the message CONTINUE
appears at the bottom of the display. In
this case press the NEXT INFO soft key
to see which other alarms have been
violated.
Alarm messages
Alarm messages and their meanings
Message Meaning
YOU HAVE ARRIVED
AT WAYPOINT.
Arrival alarm setting
violated.
YOU HAVE
EXCEEDED ANCHOR
WATCH LIMIT.
Anchor watch alarm
setting violated.
YOU HAVE ENTERED
AN AVOIDANCE
AREA.
Proximity alarm setting
violated.
YOU HAVE
EXCEEDED XTE
LIMIT.
XTE alarm setting
violated.
YOU HAVE
EXCEEDED SPEED
ALARM LIMIT.
Speed alarm setting
violated.
To Next Page
Loading...
