9-2
9.2 Saving Data to Memory
Card
The memory card can save four items of data;
track, mark/line, waypoint/route and
configuration.
Saving data
1. Insert a formatted memory card into the
slot.
2. Press the [MENU] key followed by the
CONFIGURATION and
UPLOAD/DOWNLOAD DATA soft keys.
3. Press the SAVE DATA TO MEMORY
CARD soft key. The SAVE DATA display
appears.
4. Press ▲ or ▼ to select item to save.
5. Press the EDIT soft key to open the
TRACK, MARK/LINE,
WAYPOINTS/ROUTES or
CONFIGRATION window.
6. Press ▲ to select ON.
7. Press the ENTER soft key or the [ENTER]
key.
8. Repeat from steps 4 to 7 to save other data
if desired.
9. Press the SAVE DATA soft key. The
following message appears and saving
starts. Do not remove the memory card
while data is being saved.
NOW SAVING DATA TO
MEMORY CARD. DO NOT
TURN OFF THE POWER UNTIL
SAVING COMPLETED.
SAVE DATA message
When saving is completed, COMPLETE
SAVING DATA appears.
10. Press the [ENTER] key.
Error message
Memory card not inserted
Press the [ENTER] key to return to the SAVE
DATA display.
MEMORY CARD NOT
INSERTED. INSERT CARD
PRESS "ENTER" key
TO CONTINUE.
NOT INSERTED message
Unformatted memory card
Press the [ENTER] key to return to the SAVE
DATA display. And format it referring to the
previous page.
MEMORY CARD NOT
FORMATTED
PRESS "ENTER" key
TO CONTINUE.
NOT FORMATTED message
Wrong card inserted
Appears when a chart card is inserted. Press
the [ENTER] key to return to the SAVE DATA
display. Replace it with a formatted memory
card.
WRONG CARD INSERTED.
INSERT MEMORY CARD.
PRESS "ENTER" key
TO CONTINUE.
WRONG CARD message
Data overwrite
Data type to be recorded exists on memory
card. (Two or more of same data type cannot
be recorded.) Press the [ENTER] key to
overwrite same data type on the card, or press
the [CLEAR] key to escape.
OVERWRITE FOLLOWING
DATA. OK?
YES ... "ENTER" key
NO ... "CLEAR" key
(TRACK)
OVERWRITE message
To Next Page
Loading...
