9-1
9. SAVING AND LOADING DATA
TO/FROM MEMORY CARD
The following data can be saved to memory
card:
• Mark/line
• Waypoints/routes
• Track
• Configuration (menu settings)
9.1 Formatting Memory
Cards
Before you can use a memory card it must be
formatted. Note that formatting a used card
erases all saved data.
1. Insert the memory card you want to format
into the slot.
2. Press the [MENU] key followed by the
CONFIGRATION, UPLOAD/
DOWNLOAD DATA and SAVE DATA TO
MEMORY CARD soft keys.
DGPS 3D
SAVE
DATA
EDIT
FORMAT
TRACK
MARK/LINE
WAYPOINT/ROUTE
CONFIGURATION
OFF
OFF
OFF
OFF
RETURN
SAVE
DATA
▼
SAVE DATA display
3. Press the FORMAT soft key. You are asked
if you are ready to format the memory card.
4. Press the [ENTER] key to format (or press
the [CLEAR] key to escape). Now
FORMATTING MEMORY CARD appears.
Do not remove the card while it is being
formatting. When the formatting is
completed, FORMAT COMPLETED
appears.
5. Press the [ENTER] key to finish. Now you
can record data to the memory card.
Note: Chart cards cannot be formatted.
To Next Page
Loading...
